Wooden jewelry box assembled creative toy gift puzzle wooden mechanical transmission model assembled toy DIY gift

Introduction to play(Please check the picture)

1. Assemble the product according to the instructions 2. Rotate the cover to as shown on Figure 2. 3. Then rotate the key counterclockwise (pictured) 4. Rotate until it can no longer rotate, take down the key, and align the key hole on the side (pictured) 5. Turn the key counterclockwise and the lid of the jewelry box will open slowly. 6. Put in something, then rotate the key in the opposite direction and the lid will be covered. 7. Finally, in reverse order 3.2, you can return to the state of 1.

Note

Due to the complexity of the product, it takes about 3 hours to complete the product. In the process of assembling, the gear edge part of the product needs to be rubbed on the candle, which can play a lubricating role and make the gear rotate smoothly.

product information

Product Name : Wooden jewelry box Age Range : Grownups Size : 40*18.5*3cm Material : wood

Selling Point

This is a complex mechanical transmission jewelry box model. It does not require glue nails and other tools when it is installed. It can be used as a jewelry box after assembly. It can be used as an ornament. Is the gift of choice for girlfriends